UPS APC Back UPS Pro BR 1200VA (BR1200SI)

478,08 €
(385,55 € +24% ΦΠΑ)

Κατόπιν Παραγγελίας
Καλέστε μας για πιθανή ημερομηνία παραλαβής

Μη διαθέσιμο για άμεση παραλαβή από το κατάστημα

Κωδικός Προϊόντος: 89108

Δυνατότητα άτοκων δόσεων με πιστωτική κάρτα

Δυνατότητα 6 άτοκων δόσεων με πιστωτική κάρτα

Κόστος Αποστολής

Εντός Αττικής:
(Εξαιρούνται τα νησιά)

Δωρεάν μέσω Courier

ή Δωρεάν παραλαβή από το κατάστημα

ή Δωρεάν παραλαβή από τη ΔΙΑΣ logistics

Εκτός Αττικής:

+14,50 € μέσω Courier

Κύπρος:

+36,00 € μέσω Courier

Μοιραστείτε το

Εκτύπωση Προσφοράς

Στα social media

Περιγραφή

Χαρακτηριστικά

Περιγραφή UPS APC Back UPS Pro BR 1200VA (BR1200SI)

Run time for load 720 W 4m

Max. Capacity Used 100%

Output power capacity

720 Watts / 1.2kVA

Output Connections

(2) IEC 60320 C13 (Surge Protection)

(6) IEC 60320 C13 (Battery Backup)

Nominal Output Voltage

230V

Nominal Input Voltage

230V

Input Connections

IEC 60320 C14

Back UPS Pro BR 1200VA, Sinewave,8 Outlets, AVR, LCD interface

High Performance Computer and Electronics UPS for Premium Power Protection

Includes: USB cable, User manual

Audible alarms
Provides notification of changing utility power and UPS power conditions
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery replacement without tools
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Building Wiring Fault Indicator
This LED informs users of potentially dangerous wiring problems in the wall circuit.
Cold-start capable
Provides temporary battery power when the utility power is out.
Dataline surge protection
Provides protection of connected equipment from power surges on the data lines.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
PowerChute Personal Edition OS Compatibility
This software supports numerous operating systems and processors. For further information, please bra href="http://www.apc.com/wp/?um=300"click here./a
Safety-agency approved
The UPS is UL1778 Listed
Sine wave output
Eliminates humming and heat generated when powering tube lights and fans
USB connectivity
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

BACK-UPS PRO FEATURES & BENEFITS

Dataline surge protection

Provides protection of connected equipment from power surges on the data lines.

Surge only outlets

Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

Battery and surge protected outlets

Back up and protect your hardware and data during power outages, surges and spikes.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Disconnected battery notification

Warns when a battery is not available to provide backup power.

Audible alarms

Provides notification of changing utility power and UPS power conditions

USB connection

Use your PC to access additional power protection and management features for your UPS via a USB Port.

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Boost Automatic Voltage Regulation (AVR)

Preserves battery life and maximizes runtime by correcting low voltages without discharging the battery.

Battery-protected and surge-only outlets

Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Transformer-block spaced outlets

Protect equipment with input transformer blocks without blocking access to other receptacles.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Cold-start capable

Provides temporary battery power when the utility power is out.

Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Customizable voltage-transfer points

Adjust the voltage points (widen or tighten the range) where your UPS transfers to battery to maximize useful battery life and protect sensitive electronics.

Customizable voltage sensitivity

Toggle between pre-determined voltage-transfer points depending on your power quality (high, medium or low sensitivity), maximizing useful battery life and protecting sensitive electronics.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Simple battery replacement

Increases UPS availability by allowing quick, easy battery replacement.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

TECHNICAL SPECIFICATIONS

Max Configurable Power (Watts)

720 Watts / 1.2kVA

Output Frequency (sync to mains)

50/60 Hz +/- 1 Hz Sync to mains

Topology

Line interactive

Input frequency

50/60 Hz +/- 3 Hz Auto-sensing

Input voltage range for main operations

176 - 294V

Battery type

Lead-acid battery

Typical recharge time

16hour(s)

Expected Battery Life (years)

3 - 5

RBC Quantity

Battery Charge Power (Watts)

13 Watts

Battery Volt-Amp-Hour Capacity

204

Runtime

View Runtime Graph

View Runtime Chart

Interface Port(s)

USB

Control panel

Multifunction LCD status and control console

Audible Alarm

Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

Surge energy rating

509Joules

Data Line Protection

RJ45 10/100/1000 Base-T Ethernet protection

Filtering

Full time multi-pole noise filtering : 10% of IEEE surge let-through : zero clamping response time: instantaneous

Maximum Height

260MM, 26.0CM

Maximum Width

100MM, 10.0CM

Maximum Depth

368MM, 0.0CM

Net Weight

11.7KG

Shipping weight

13.35KG

Shipping Height

359MM, 35.9CM

Shipping Width

223MM, 22.3CM

Shipping Depth

482MM, 48.2CM

Color

Black

Master Carton Dimensions (Length x Width x Height)

381 x 483 x 229MM

Master Carton Units

1.0

Master Carton Weight

14.21

SCC Codes

10731304346897

Operating Temperature

0 - 40 °C

Operating Relative Humidity

0 - 95 (Non-condensing) %

Operating Elevation

0 - 3048meters

Storage Temperature

-15 - 45 °C

Storage Elevation

0 - 15240meters

Audible noise at 1 meter from surface of unit

45.0dBA

Online thermal dissipation

16.0BTU/hr

Approvals

A-Tick, C-Tick, CE, EAC, GS Mark, RCM, TISI

Equipment protection policy

Lifetime : 150000 euros, Lifetime : 200000 AUD, Lifetime : 75000 GBP

Standard warranty

2 years repair or replace, 3 years repair or replace for European Union countries

Χαρακτηριστικά UPS APC Back UPS Pro BR 1200VA (BR1200SI)

Παρακάτω θα βρείτε τα βασικά χαρακτηριστικά του UPS APC Back UPS Pro BR 1200VA (BR1200SI) καθώς και τους σχετικούς κωδικούς.

Κωδικός Προϊόντος	89108
Κατασκευαστής	APC
Part Number	BR1200SI
Κατηγορία	UPS - Οικιακά & Επαγγελματικά
Τύπος	Line Interactive
Ισχύς (VA)	1200
Ισχύς (WATT)	720
Waveform output	Sine Wave
Εγγύηση	2 Έτη
PDF Χαρακτηριστικών	Χαρακτηριστικά UPS APC Back UPS Pro BR 1200VA (BR1200SI)
Τιμή	478,08 €
Τιμή χωρίς ΦΠΑ	385,55 € +24% ΦΠΑ